Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!news.arc.nasa.gov!haven.umd.edu!mimsy!uunet.UU.NET
From: wa3wbu!john@uunet.UU.NET (John Gayman)
Newsgroups: rec.guns
Subject: Re: Getting Started Reloading
Message-ID: <35694@mimsy.umd.edu>
Date: 15 Jun 91 15:16:30 GMT
Sender: magnum@mimsy.umd.edu
Organization: @ WA3WBU, Marysville, PA
Lines: 19
Approved: gun-control@cs.umd.edu


In article <35569@mimsy.umd.edu>, nstar!bluemoon!jamaass@iuvax.cs.indiana.edu (Jeffrey A. Maass) writes:
# harrism@aquila.rtp.dg.com (Mike Harris) writes:
# Is it necessary to trim 9mm/.45ACP brass? I'd been told that
# the non-rifle cases won't need trimmed.
# 

    I've reloaded my batch of .45 cases about 25 times. I've never had to
trim them. In fact, they seem to keep getting shorter. :-)  Rifle on the
otherhand is a different story.


					John


-- 
John Gayman, WA3WBU              |           UUCP: uunet!wa3wbu!john
1869 Valley Rd.                  |             
Marysville, PA 17053             |           Packet: WA3WBU @ WB3EAH