Xref: utzoo sci.electronics:20814 comp.sys.m68k:2363 comp.sys.misc:3447 comp.sys.ibm.pc.hardware:9623
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!spool.mu.edu!uunet!infonode!fordke
From: fordke@infonode.ingr.com (Keith Ford x8614)
Newsgroups: sci.electronics,comp.sys.m68k,comp.sys.misc,comp.sys.ibm.pc.hardware
Subject: controller design ???
Message-ID: <1991Jun11.182236.18238@infonode.ingr.com>
Date: 11 Jun 91 18:22:36 GMT
Sender: fordke@infonode.ingr.com (Keith Ford x8614)
Followup-To: fordke@ingr.com
Organization: Intergraph Corp. Huntsville, AL
Lines: 14

I am working on a project that will be handheld in size, will drive an
LCD display, needs to communicate with a serial port, do floating point
calculations, and access a large amount of data on an EPROM.  I have
considered the MCS-51 family (8031 etc.) because of it's readily available
development systems.  Who supplies development systems for the 68000?
I would like to do the development with a pc based system test bed.
Can someone  suggest a better solution.  I understand how things go
together, but am having problems getting started.  Please send email if
possible.  fordke@ingr.com
-- 
 __
/  \ Micro Magic  1:373/12  (205)830-2362  keith@umagic.fidonet.org
\__/ home of OCAT/OBUL/OASWAP/Arkalog and the Rush archives
[__] "He knows changes aren't permanent, but change is" -Rush