Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!rex!rouge!gator.cacs.usl.edu
From: ham@gator.cacs.usl.edu (Hameed Ahmed Mohammed)
Newsgroups: comp.lsi.cad
Subject: Re. Errors in running Verilog&HSpice in Cadence
Message-ID: <33199@rouge.usl.edu>
Date: 19 Jun 91 00:00:51 GMT
Sender: anon@rouge.usl.edu
Distribution: na
Organization: The Center for Advanced Computer Studies, USL
Lines: 36

:Originator: lopez@corolla.ece.cmu.edu


:	A friend of mine is having some problems integrating Verilog and Hilo 
:into the CADENCE Software (SUN-3 environment). Both tools run properly when 
:called from the shell, but from the framework menus, some errors are reported:

:	- Verilog: Error in the keyfile
	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

	As far as I know, Cadence issues keys to port the software you
	get from them , onto your system.
	
	Your problem indicates that you are specifying a different key

	or a possible error on part of the distributor.
	
	- Hilo: Compilation error
	^^^^^^^^^^^^^^^^^^^^^^^^

	We experienced a not too similar problem in running Hspice.
	It'd run outside the environment. But not when invoked from the
	menus. Later, it was found that we had a copy that doesn't
	match with the spex of the framework. It was replaced promptly
	by Cadence.

:Any hints would be appreciated. Thanks in advance.

:							Juan Carlos

	I might not have hit the head. But just a piece of clues



Mohammed A. Hameed
ham@gator.cacs.usl.edu