Xref: utzoo comp.periphs:3842 misc.wanted:15745 comp.sys.ibm.pc.hardware:9923
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!unix.cis.pitt.edu!dsinc!netnews.upenn.edu!vax1.cc.lehigh.edu!lehigh.bitnet!AWY0
From: AWY0@NS.CC.LEHIGH.EDU (Arden W. Young)
Newsgroups: comp.periphs,misc.wanted,comp.sys.ibm.pc.hardware
Subject: RE: Need dip switch settings for star Geminihardware
Message-ID: <17069123:19:05AWY0@lehigh.bitnet>
Date: 18 Jun 91 04:19:16 GMT
Lines: 9

The DIP Switch settings for the 10-X are--
1-"on" for paper out signal
  "off" no signal
2-"off"prints every time CR code received
  "on" prints only when the buffer is full
3-"off"
4-"off"
3 and 4 are the settings for IBM.
Hope this helps.