Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!caen!spool.mu.edu!uwm.edu!csd4.csd.uwm.edu!jschwarz
From: jschwarz@csd4.csd.uwm.edu (Joseph V Schwarz)
Newsgroups: comp.sys.3b1
Subject: Combo board Jumpers?
Message-ID: <13271@uwm.edu>
Date: 21 Jun 91 03:08:29 GMT
Sender: news@uwm.edu
Distribution: na
Organization: University of Wisconsin - Milwaukee
Lines: 18
Originator: jschwarz@csd4.csd.uwm.edu

I recently purchased a RAM/combo board , and it came without documentation.
I bought it unpopulated, because I have enough RAM chips to fill it. I would
like to know if the three jumpers on the board (w1, w2, w3) need to be set
in any way. Currently w1 and w2 are capped, and w3 is not.

Also, do I have to install anything besides the software for it? I am 
running 3.51 OS with Fix Disk 2.0 (3.51m kernel).

I would like to find out what needs to be done before I go and mangle my
system up! :-)

Thanks to one and all-
Joe
-- 
******************************************************************************
*  Joe Schwarz - jschwarz@csd4.csd.uwm.edu                                   *
*  All FLAMES go directly to /dev/null do not pass GO, do not collect $200!  *
******************************************************************************