Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!wuarchive!waikato.ac.nz!comp.vuw.ac.nz!actrix!tornado!sideways!rhodar From: rhodar@sideways.gen.nz (David Salmon) Newsgroups: comp.sys.acorn,eunet.micro.acorn Subject: Re: Master Configuration Keywords: 8-bit Master Configuration Message-ID: Date: 21 Jun 91 00:54:58 GMT References: <+MX{MF-@warwick.ac.uk> Organization: Sideways Bulletin Board, Lower Hutt, New Zealand. Lines: 37 cstaqdb@warwick.ac.uk (Tom Hughes) writes: > Can someone with access to some beeb manuals please post the details > for configuring the baud rate and data transfer info on the Master, as > I don't have my manuals here. > > The items in question are the *CONFIGURE BAUD and *CONFIGURE DATA > values. These are the same as for *FX's 8 and 9 (??) on the beeb. > The following is taken from the Reference Manual Part One: To configure the baud rate is *configure baud <0 - 8> 0 = 9600 baud 1 = 75 baud 2 = 150 baud 3 = 300 baud 4 = 1200 baud 5 = 2400 baud 6 = 4800 baud 7 = 9600 baud and 8 = 19200 baud To configure baud is just *configure data <0 - 7> where: 0 = 7E2 1 = 7O2 2 = 7E1 3 = 7O1 4 = 8N2 5 = 8N1 6 = 8E1 7 = 8O1 Hope that helps. ------------------------------------------------------------------------ Rhodar@Tornado.welly.gen.NZ or Rhodar@Sideways.welly.gen.NZ Yad ho! Groja UL! *-}-----