Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!think.com!yale.edu!ox.com!math.fu-berlin.de!mailgzrz!opal!fauern!faui43.informatik.uni-erlangen.de!hgschmie
From: hgschmie@immd4.informatik.uni-erlangen.de (Henning Schmiedehausen)
Newsgroups: comp.sys.amiga.misc
Subject: HELP! Prefs-Problems under Wb 2.0
Summary: A3000 boots with wrong screen resolution
Keywords: HELP
Message-ID: <1991Jun19.132820.19300@informatik.uni-erlangen.de>
Date: 19 Jun 91 13:28:20 GMT
Organization: CSD., University of Erlangen, Germany
Lines: 31

Hi, everyone!

Most important first: I use an A3000 with Kick 37.175, WB 37.48

I want my system to boot up with an standard NTSC Hires Interlace 
Display, but even if I set this with the prefs/Screenmode and the
prefs/Overscan program, the machine boots up with an 640x256 PAL
display, and only after starting the iprefs program, the machine
switches to the wanted resolution (AFTER closing the CLI, of 
course). So my question is: How can I tell my Amy to boot with
NTSC 640x400 resolution? I do not need WB very often, and it's annoying
to close all CLI windows, wait for resolution change and the opening
my CLIs again whenever I boot up. 
I've seen the same versions of software on an A2000 with GVP 3001
board, and these versions (Kick @ $200000 ) boot up with an NTSC screen.
But I've set up my system exactly like my friends' and it won't work
with me.
I have scanned the kickstart-file for filenames and I stumbled over
a 'devs:system-configuration'. But none of the prefs programs change
the ( old Wb 1.3 ??? ) devs:system-configuration file. So, what magic
must I do to my Amy to do the trick?

	Ciao
		Henning


---
ONLY  ///    Real: Henning Schmiedehausen         | Logik? Logik und Berechen-
 __  ///     INT:  hgschmie@immd4.uni-erlangen.de | barkeit? Was ist das?
 \\\///      UUCP: henning@castle.erh.sub.org     | Kann man das essen?
  \XX/ AMIGA 3000 / 1510 -- UUCP 1.12D | Welcome to A3000. Welcome to machine.