Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!cronkite!exodus!stpeter.Eng.Sun.COM!cmcmanis From: cmcmanis@stpeter.Eng.Sun.COM (Chuck McManis) Newsgroups: comp.sys.amiga.misc Subject: Re: Need multiport serial driver!!!! Message-ID: <15545@exodus.Eng.Sun.COM> Date: 20 Jun 91 06:19:00 GMT References: <1991Jun15.181950.26600@brazeau.ucs.ualberta.ca> Sender: news@exodus.Eng.Sun.COM Organization: Sun Microsystems, Mt. View, Ca. Lines: 21 In article <1991Jun15.181950.26600@brazeau.ucs.ualberta.ca> thierman@namao.ucs.ualberta.ca (Chris Thierman) writes: >After having purchased an Amiga 2232 card, I've found that I cannot >seem to communicate with the card. The software supplied by commodore >specificly the serial.device driver does not seem to work at all. I have a 2232 that works fine (witness this response). To use the 2232 requires changing more than just serial.device, you must also change the Port-Handler, Aux-Handler and Mount command. (of course you only really need Aux-Handler and Mount if you are going to use it through AmigaBasic or with NewCLI but ...) anyway. I take it the install program crashed you machine like it did on mine? Put those new files on your machine and everything will work fine. Trust me. -- --Chuck McManis Sun Microsystems uucp: {anywhere}!sun!cmcmanis BIX: Internet: cmcmanis@Eng.Sun.COM These opinions are my own and no one elses, but you knew that didn't you. "I tell you this parrot is bleeding deceased!"