Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!think.com!snorkelwacker.mit.edu!hsdndev!dartvax!mars!bates!lablues!lazer
From: lazer@lablues.UUCP (Patrick Delahanty)
Newsgroups: comp.sys.apple2
Subject: ModemWorks upgrade
Message-ID: <49Nu43w164w@lablues.UUCP>
Date: 20 Jun 91 17:11:02 GMT
Organization: L/A Blues BBS - Auburn, Maine (207) 777-3465
Lines: 16

I'm trying to upgrade ModemWorks from the demo 2.0 version to version 2.0C 
which I bought.  I'm using it with AppleNet v1.3 and ModemWorks breaks when 
it gets to the command & MODE (0).  I tried removing the command all 
together and now the screen is cleared for some reason.  Is there a series 
of replacement commands to create the same effect as & MODE (0).  It's not 
in my manual so I don't even know what it does so I don't know where to 
start.  Any help would be appreciated.
 
Also...if you're using the SMT No-Slot-Clock with ModemWorks...make sure you 
give a ? CHR$(4)"PR#0" before you run AmperWorks and then give your ? 
CHR$(4)"PR#3" after.  I had the PR#3 before without a PR#0 and the clock 
wouldn't work with the & TIME (T$) command.  It works fine now...but I still 
can't get the day of the week and the seconds to come up...but that's not as 
important.
 
-Lazer