Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!mcsun!cernvax!chx400!bernina!colbach
From: colbach@nessie.cs.id.ethz.ch (Philippe Colbach)
Newsgroups: comp.sys.handhelds
Subject: FAST program for HP28S
Message-ID: <1991Jun18.075250.6507@bernina.ethz.ch>
Date: 18 Jun 91 07:52:50 GMT
Sender: news@bernina.ethz.ch (USENET News System)
Organization: Swiss Federal Institute of Technology (ETH), Zurich, CH
Lines: 27
Nntp-Posting-Host: nessie


  Hi HP28S owners!

I am reposting a very short sequence to create the wellknown FAST program
(only version 2BB!). I discovered this simple methode together with
Georges Wachter and Roland Boes, both students at the ETHZ.

Just execute the following program:
<< #5081F80002B02C96h
   #80D51FFF00F1F030h
   #C808461241050B8Fh
   #3B82h  SYSEVAL
   #3B82h  SYSEVAL
   #3CEAAh SYSEVAL
   'FAST' STO
>>

					Philippe
          
------------------------------------------------------------------------------
Philippe Colbach                        Addresses in Switzerland & Luxembourg:
Civil Engineer Student                  Lerchenrain 13/04    36b, rue A. Meyer
Swiss Federal Institute of Technology   CH-8046 Zurich       L-2153 Luxembourg
ETH Zurich (Switzerland)                Switzerland          Luxembourg
                                  _  /\
colbach@nessie.cs.id.ethz.ch  .../ \//....  IRIX System V Release 3.3.2 nessie
------------------------------------------------------------------------------