Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!zazen!news
From: michaelb@vms.macc.wisc.edu (Michael Bloxham)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Adaptec 1542B and Fujitsu SCSI drive - won't BOOT!
Message-ID: <1991Jun20.035357.25316@macc.wisc.edu>
Date: 20 Jun 91 03:50:47 GMT
Sender: news@macc.wisc.edu (USENET News System)
Distribution: world
Organization: University of Wisconsin Academic Computing Center
Lines: 15

I am attempting to install a Fujitsu M2263S/H SCSI drive in a DTK 386/33
machine (with DTK BOIS) and a Trident 256kb SVGA card. I can boot from 
floppy and create a partition on the HD, format it and put a SYStem on it, 
but the machine will not boot from the drive.  The adaptec BIOS finds the 
drive, and the DTK BIOS is configured for NO-DRIVe like the adaptec manual 
says to do.  After looking for a floppy in drive A:, the system hangs.
The Adaptec BIOS is loading in a good memory location (video is not 
interferring).  Any ideas??  Any help would really be appreciated.

mike

-----------------------------------------------------------------------
Michael L. Bloxham         | Real programmers don't comment their code. 
michaelb@vms.macc.wisc.edu | If it was hard to write, it should be hard
michaelb@WISCMACC.bitnet   | to understand.