Xref: utzoo comp.sys.zenith:789 comp.sys.ibm.pc.hardware:10018
Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!netnews.upenn.edu!widener!news.cs.indiana.edu!noose.ecn.purdue.edu!en.ecn.purdue.edu!garlangr
From: garlangr@en.ecn.purdue.edu (Mark T Garlanger)
Newsgroups: comp.sys.zenith,comp.sys.ibm.pc.hardware
Subject: IDE Drive and SCSI Drive on same system.
Keywords: IDE SCSI Zenith
Message-ID: <1991Jun19.190126.29791@en.ecn.purdue.edu>
Date: 19 Jun 91 19:01:26 GMT
Followup-To: comp.sys.zenith
Distribution: usa
Organization: Purdue University Engineering Computer Network
Lines: 18

I would like to add more disk space to my system, I have a Zenith 286LP
with an internal 40 Meg Conner IDE Drive.  I would like to keep that drive
and since there is NO room in the case to add another drive, I was thinking
of adding an external SCSI Drive.  Will this work?  Has anyone tried to
do this with a Zenith 286LP?  I could just replace the 40 Meg drive with
an internal 105 Meg IDE but I would only be gaining 65 Megs instead of 
105 Meg if I used an external drive.  If anyone is using both IDE and 
SCSI in their system could they either E-mail me a message stating
that it works and/or any problems you have with it.  

   				Thanks,
				  Mark

-- 
-------------------------
Mark Garlanger          |
garlangr@ecn.purdue.edu |
-------------------------