Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!van-bc!rsoft!mindlink!a1076
From: Robert_Bell@mindlink.bc.ca (Robert Bell)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: chaining ide harddrives.
Message-ID: <6280@mindlink.bc.ca>
Date: 14 Jun 91 23:08:03 GMT
Organization: MIND LINK! - British Columbia, Canada
Lines: 15

I am trying to chain a wd 93044-a and a teac sd340 ide drive together.
At the moment I have the wd as drive C and the teac as the slave drive,on the
teac there is a set of 4 jumpers and going from the left(looking at the rear of
drive) I have jumper 1 shorted,2 open and 3 and 4 shorted.At the moment my
computer recognises the drive C but says there is an error with drive D.The
Teac is a 40 meg drive but how many cylinders does it have and what type of
drive should i set it up as under the latest version of AMI bios,my C drive is
set up as type 17.
Thanks!
--
-------------------------------------------------------------------
Robert Bell                       uunet!van_bc!rsoft!mindlink!a1076
Benndorf-Verster                  a1076@mindlink.uucp
Vancouver Canada                  voice 604-853-5870
-------------------------------------------------------------------