Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!ucbvax!NRC3D.NRC.UAB.EDU!jpg
From: jpg@NRC3D.NRC.UAB.EDU (Jill Gemmill)
Newsgroups: comp.sys.sgi
Subject: (none)
Message-ID: <9106181359.AA01911@nrc3d.nrc.uab.edu>
Date: 18 Jun 91 13:59:43 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 25

>Is there a way to get graphics that I have on my screen to a
>laserprinter. I don't want to use tools like snapshot + tops
>as they print the actual pixel off the screen (bad resolution
>on the printer).
>What I'm looking for is some sort of device driver that can
>be called from my gl-program.

It sounds like you want to be drawing on your screen in postscript, 
then using same commands with differenct device driver for the
printer.


-------------------------------------------------------------------------------
    Jill Gemmill			    	
    Neurobiology Research Center	    INTERNET: jpg@nrc3d.nrc.uab.edu
    University of Alabama at Birmingham  
    Volker Hall G82E			    PHONE: 205-934-7111 
    Birmingham Alabama 35294-0019	    FAX: 205-934-6571
-------------------------------------------------------------------------------