Xref: utzoo comp.unix.sysv386:9205 comp.dcom.modems:10525 Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!munnari.oz.au!manuel!cmf851 From: cmf851@anu.oz.au (Albert Langer) Newsgroups: comp.unix.sysv386,comp.dcom.modems Subject: Re: Getty for ISC/Telebit T-2500 w/autobaud via the CONNECT msg? Keywords: Telebit, getty, autobaud, bi-directional Message-ID: <1991Jun21.172926.22654@newshost.anu.edu.au> Date: 21 Jun 91 17:29:26 GMT References: <1991Jun17.142748.670@uunet.uu.net> <1991Jun20.171902.23267@Sandelman.OCUnix.on.ca> Sender: news@newshost.anu.edu.au Organization: Computer Services Centre, Australian National University, Canberra, Australia. Lines: 17 In article <1991Jun20.171902.23267@Sandelman.OCUnix.on.ca> mcr@Sandelman.OCUnix.on.ca (Michael Richardson) writes: >The "Telebit" streams module knows how to do things with Telebits on >the other end of the line. (you could probably get away with a generic >'Hayes' module, I don't know yet) Go for it. I'm not sure whether it should be viewed as a streams module or as a sort of Media Access component of the data link layer but it's about time everything to do with handling modems was put in once place (with configuration files for the particular hardware etc) so that higher layers of software just tell it what phone number they want to connect to or accept a connection from it. -- Opinions disclaimed (Authoritative answer from opinion server) Header reply address wrong. Use cmf851@csc2.anu.edu.au