Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!uunet!intran!tom
From: tom@intran.UUCP (Tom B.)
Newsgroups: comp.robotics
Subject: Re: Where to get ball and socket assembly?
Summary: hobby shops got it all
Message-ID: <368@intran.UUCP>
Date: 21 Jun 91 00:11:09 GMT
References: <15535@ccncsu.ColoState.EDU>
Organization: Xerox/Intran Corp, Mpls
Lines: 9


For ball and socket assemblies try a good R/C hobby shop.  Either in the 
R/C Car (drive shaft type maybe not 50LBs though!), or R/C boats.  A good
High CC engine will put out a ton of touque plenty enough to support a 50
LB robot.

Good luck, and describe your robot sometime.

tommy b.