Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!samsung!uunet!mcsun!ukc!strath-cs!prlhp1!hoskinsa
From: hoskinsa@prlhp1.prl.philips.co.uk (hoskinsa)
Newsgroups: comp.sys.acorn,eunet.micro.acorn
Subject: Re: Master Configuration
Keywords: 8-bit Master Configuration
Message-ID: <1365@prlhp1.prl.philips.co.uk>
Date: 21 Jun 91 09:40:49 GMT
References: <+MX{MF-@warwick.ac.uk>
Reply-To: hoskinsa@prlhp1.UUCP ()
Organization: Philips Research Laboratories, Redhill, UK
Lines: 36

In article <+MX{MF-@warwick.ac.uk> cstaqdb@warwick.ac.uk (Tom Hughes) writes:
>Can someone with access to some beeb manuals please post the details
>for configuring the baud rate and data transfer info on the Master, as
>I don't have my manuals here.
>
>The items in question are the *CONFIGURE BAUD and *CONFIGURE DATA
>values. These are the same as for *FX's 8 and 9 (??) on the beeb.
>
>Thanks for any help, Tom.

Here are the numbers for *FX7,X (receive rate) and *FX8,X (transmit
rate):

   X=1 :    75 baud           After Call:
     2 :   150 baud                  A is preserved.
     3 :   300 baud                  X & Y contain old ULA register contents.
     4 :  1200 baud                  C is undefined.
     5 :  2400 baud
     6 :  4800 baud
     7 :  9600 baud
     8 : 19200 baud

Mail me if you want the info to set up data format (# of start/stop/data
bits) and I'll see if I can persuade my OCR to read the manual (too much
to type :-).

Asher

+----------------------------------------------------------------+
| And then a little pink swan flew slowly past, the marmalade    |
| curdled, and everyone in Legoland went home for a concrete     |
| penguin. "Don't forget to write", shouted Sniffy, but the cake |
| had already been eaten. - BSH                                  |
+-----------------------------------------------+----------------+-----------+
                                                | hoskinsa@prl.philips.co.uk |
                                                +----------------------------+