Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!caen!spool.mu.edu!uunet!overload!dillon From: dillon@overload.Berkeley.CA.US (Matthew Dillon) Newsgroups: comp.sys.amiga.datacomm Subject: Re: Networking an Amiga 500 to a 3000 Message-ID: Date: 20 Jun 91 18:17:14 GMT Article-I.D.: overload.dillon.8911 References: <17888@chaph.usc.edu> <1575@caslon.cs.arizona.edu> <1991Jun18.072307.11118@marlin.jcu.edu.au> <1991Jun18.160822.1964@msuinfo.cl.msu.edu> Organization: Not an Organization Lines: 26 In article <1991Jun18.160822.1964@msuinfo.cl.msu.edu> griffin@frith.egr.msu.edu (Danny Griffin) writes: >cpdrj@marlin.jcu.edu.au (David R Jeffery) writes: > >>I have tried using NET: (or Parnet) and I am having a problem with large >>transfers, when around 800k to 1meg is transfered in either direction >>that machine "seems" to lose access to the NET:, that is it just hangs > >Strange - I have transfered entire HD partitions using ParNet. Are you >using the original parallel port, or a new parallel port? > >-- >Dan Griffin >griffin@frith.egr.msu.edu Did you connect up ALL the grounds? Are you using a shielded cable? Between which types of computers is it running (e.g. A1000 to A500, etc, etc). -Matt -- Matthew Dillon dillon@Overload.Berkeley.CA.US 891 Regal Rd. uunet.uu.net!overload!dillon Berkeley, Ca. 94708 USA