Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!ira.uka.de!fauern!forwiss.uni-passau.de!platon.fmi.uni-passau.de!burkert1
From: burkert1@platon.fmi.uni-passau.de (Klaus Burkert)
Newsgroups: comp.sys.amiga.emulations
Subject: Re: Janus Software Version
Keywords: AT, Amiga, 2286, Janus
Message-ID: <1991Jun25.191553.18855@forwiss.uni-passau.de>
Date: 25 Jun 91 19:15:53 GMT
References: <ftegerer.677873568@faui09>
Sender: usenet@forwiss.uni-passau.de (USENET News System)
Organization: University of Passau, W-Germany
Lines: 36
Nntp-Posting-Host: cicero.fmi.uni-passau.de

In article <ftegerer.677873568@faui09> ftegerer@faui09.informatik.uni-erlangen.de (Frohwalt Egerer) writes:
>Could someone tell me if my Janus Software is up-to-date? 
>
>When I reboot the AT it displays the following stuff under the BIOS-box:
>
>Janus-Handler 2.63
>Janus Library 33.1

That's OK.
[...]
>My Hardware configuration:
>
>ALFII HD Controller
>Supra RAM Board (6 Meg)
>Amiga 2000 Rev 4
>ECS
>AmigaOS 1.3 and 2.0  (The board works _slightly_ better under 2.0)
>
>Another thing:
>
>Today I got an A2630 Turbo Board with 2 Megs RAM - now I got 8 Megs RAM
>plus the BridgeBoard. The result: out of autoconfig space.
>Now the question:
>Is there any way to make the BridgeBoard autoconfig to some other area?
>I got SO MUCH of free address space, and the BB configs to the area
>where the mem expansions belong!
>
No, no way! :-((
You have to remove 2 Meg from Your RAM-Expansion.

Ciao, Klaus.

-------------------------------------------------------------
Klaus Burkert        email: burkert1@platon.fmi.uni-passau.de
Brandweg 11          voice: +49-851/83993
D-W-8390 Passau   /  Federal Republic of Germany