Newsgroups: comp.sys.amiga.graphics Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!menudo.uh.edu!karazm.math.uh.edu!jet From: jet@karazm.math.uh.edu (J Eric Townsend) Subject: parallel graphics for the 'miga (was Re: Molec3D Message-ID: <1991Jun22.213629.9845@menudo.uh.edu> Keywords: molecular graphics, amiga Sender: usenet@menudo.uh.edu (USENET News System) Nntp-Posting-Host: karazm.math.uh.edu Organization: University of Houston -- Department of Mathematics References: <20843@sdcc6.ucsd.edu> <1991Jun21.222643.14055@menudo.uh.edu> <20882@sdcc6.ucsd.edu> Date: Sat, 22 Jun 1991 21:36:29 GMT In article <20882@sdcc6.ucsd.edu> rblewitt@sdcc6.ucsd.edu (Richard Blewitt) writes: >Getting back to the Amiga, a few multiprocessing boards >stuffed in Zorro III slots, along with a 34020 graphics board setup >could make on hell of a killer modeling workstation, for a mere >$25-30K. Here's a list sent to me by a fellow amigan: >From: BOATWRIGH@vax.lse.ac.uk >Subject: Transputers -At last the info > > Well here at last is the information I've been able to find on TRANSPuters >and Graphics software on them: > >Producer: SANG Computersysteme Gmbh > Am Wuennesberg 13 > D - 4300 Essen 1 > Germany > Tel: (Germany)- > > >201 / 7101191 >Products: MEGA-Link-Interface > For: zorro II Slots > Function: This is the interface that is required to connect the SANG > Transputer-boards to the amiga. Besides the actual > > Hardware it also has softtware on board to make the > usage of the transputers possible from the AMIGA. > (Please excuse the awful english, but I'm translating > all these messages as I type from german) >Price: DM: 400.- > (At time of print March 90) > > >Product: MEGA-Link01- plus >For: Zorro II Slot >NOTE: MEGA-Link-Interface required! >Function: This board comes with four T800-Processors with > (each with) 1 - 8 MB RAM per piece (Transputer chip) > (oops!) As with all other MEGA-Link boards this > board can be expanded with an arbitrary number of > other boards (and hence Transputers), Leading > to increadible performance >Price: DM 13600.- - 44000.- > (Exchange rate $ for DM is about 1.5DM per $) > >Product: MEGA-Link02 >For: Zorro II > MEGA-Link-Interface required >Function: Transputer board with one T425/T800 processor > with a maximum of 8MByte of RAM. > Also on board is a Colour video controler > working at 110 MHz and capable of 16,7 Mio. > Colours (at once). The controler has a port > for a Framegrabber or a U-Matic-Videomachine. > Multiple boards can be linked up in parallel > to increase processing power. Main application > area of this board it the graphics area. >Price: DM 8000.- - 11200.- > >Product: MEGA-Link03 >For: Zorro II > MEGA-Link -interface >Function: Data as Mega-Link01 plus but with one T425/T800 > having upto 32MByte RAM. >Price: DM 4000.- - 37000.- > > >FIRM: X-PERT >Product: Avalon >General info: The avalon harware ranges from models for the > A500 to highlyintegrated transputer boards for > the A3000. The following software can be > purchased from X-pert supporting these boards: > -TRANSPUTER-ASSEMBLER with an AMIGA specifie > set of Commands and LIBRARIES > -PARALLEL-C Compiler > -HELIOS (Operating System for transputers) > *PLUS* > -THE INMOS development system > *RAYTRACING*: > -MIRANIM > -MARASHADING > -SABRINA > (all support AVALON) > It is recomended that the AVALON hardware > be used in conjunction with the VISIONA > Graphics boards to achieve best results. > > All boards have a HIGH-SPEEDLINK-TRANSFER > with a transfer rate of 1MByte plus. > There are five boards in the AVALON > series: > >Product: AVALON Junior >For: A500 >Function: One T800 > (i think) > With up to 8MByte of memory. > >Product: ALALON T1 >For: Zorro II and Zorro II slots >Function: (no description in book) > >Product: AVALON T4 >For: Zorro II and Zorro III slots >Function: Up to 4 T800 each with up to > 4MByte RAM > >Product: AVALON M64 >For: Zorro II and Zorro II > Zorro IIII >(sorry I mean of course Zorro III) >Function: AS T1 I think but with 64MByte also > as T4 > >Product: AVALON MODULAR >For: Zooro II and ZorroIII >Function: High-Flexibility by using and choosing > the modules to suit your application. > Improve you transputer board by upgrading > with such modules as single transputers > or cache memory or interfaces. > AVALON MODULAR is compatible to the nuw > (new) INMOS standard B008. This means > that up to 10 T800's can be placed on > a single Board. >MODULES: T800 with 1MB DRAM > T800 with 4MB DRAM > T800 with 8MB DRAM > T800 with 128KB no wait-state SRAM > T800 with 1MB no wait-state SRAM > T800 with 2MB no wait-state SRAM > T800 with 2MB DRAM and 32KB no wait-state SRAM > (double module width) > T800 with 4MB DRAM and 128Kb n.w-s. SRAM > (double module-width) > T801 with 160kb n.w-s SRAM (double > module width) > >Hope this helps you, unfortunatly I have no prices dfor the XPert equipment so heres >the address so you can find out for yourself: > XPert Computer Services GmbH > Weiherwiese 27 > D - 6270 Idstein > Germany > Tel: (Germany) 6126-8809/3056 > Fax: (Germany) 6126/54922 > >And from the 1.1.91: > Xpert Computer Services G,mbH > HighTech-Zentrum > (Moosfeld) > Schatzbogen 56-58 > 8000 Muenchen 82\ > (Germany) > > >FIRM: Binaerdesign Computer-Grafik (Germany) >Address: Binaerdesign Computer-Grafik > Am Sanderring 22 > D - 8700 Wuertzburg > (Germany) >Tel: (Germany) - 931-18540 >Fax: (Germany) - 931-13222 >NB: All prices incl. 14% vat > (All the prices I've alreay quoted also include 14%vat) > >Product: Amiga Transputer Workstation > 10 MIPS > + 1.5 MFlops pro 20Mhz T800 Transputer > Internaly expandable with up to 5 T800's > Up to 1280 * 1024 in 256 Colours and 800*900 in 16.7mil > Unix-Like OS HeliOS. (Multitasking) > X-Windows type interface available > Transputers run parallel and can be also used seperatly > >Price: On inquiry depending on expansion. > >Product: Transputer Software >Program: Sabrina > 3D modeling in 16.7 million colours > Support of multiple transputers > Output in pal res.or in 8000*8000 (slides) > >Program: Miranim > Script-Orienteted Animation system > (script graphicsl) > Sehr complex animations, films and simulations possible. > Expandible with the language Cinemira-2 > Includes Sabrina dor 3D modeling. > VLAN compatible control of single frame video recorders. > >Display: Output or 24Bit Amiga Graphics (TurboSilver, Sculpt3D, > DigiView, TIFF, TGA, Miranim, 3DProfessional, Calgari,...) > VLAN compatibility as above. Export in IFF TGA and Miranim > formats. > >Prices: SABRINA - DM 3498.00 > MIRANIM - DM 19398.00pf > DISPLAY - DM 998.00pf > >Products: Amiga-Computer Graphic Software > >Program: Caligari Professional DM 3998.00pf >Program: 3D Professional DM 998.00pf >Program: Painter 3D DM 239.00pf > >Products: Amiga Computer-Grafik hardware >Product: 24Bit Transputer-Graphic board 800*600 DM 8500.00pf >Product: MICROWAY FlickerFixer DM 948.00pf >Product: Genlock Option for FlickerFixer DM 178.00pf >Product: GVP Turboboard 68030/68882 28MHz, 4MB DM 4498.00pf >Product: GVP SCSI Harddisk and controller ???????? >produc >Product: Optical-Changable Disk (up to 650MB) DM 9998.00pf\ >Product: Network Ethernet startkit for 2 Amiga's DM 2498.00pf >Product: Complete graphic systems in all configurations required > available. > >VIDEO SYSTEMS >Product: Single Picture Recording System from DM 22998.00pf > JVC Professional S (VHS S-VHS) Edicorder BRS 811S > VLAN interface and control > Software for MS-Dos and AMIGA systems available. > (for the Transputers) >Product: Videocomp Hardware > G100 Component Genlock > Videobus - modular Videointerface > DVE 10 A new video processing system for the Amiga system > with a Digitiser, Genlock, and Videomixer. >Price: DM 2998.00pf > >Product: Videomedia Video-Cut and control systems > VLAN systems for Video editing and productioncontrol > >Product: JVC Professional Videosysteme > Professional-S Recorders and Cameras > MII Components, Recorders and Cameras > Videomixers and Effectsystems > (No prices given) > >S E R V I C E S > Computer graphics and animations (to specs) > DTP and advertising agence. > Single pictur > Single frame recording service for animations. > > > > >Hope this helps you even more, Id love to buy all of these but can afford them >All the best, > Niall > (npd@doc.ic.ac.uk) > -- J. Eric Townsend - jet@uh.edu - bitnet: jet@UHOU - vox: (713) 749-2126 Skate UNIX! (curb fault: skater dumped) PowerGlove mailing list: glove-list-request@karazm.math.uh.edu