Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!spool.mu.edu!sol.ctr.columbia.edu!ira.uka.de!fauern!faui43.informatik.uni-erlangen.de!faui09!ftegerer
From: ftegerer@faui09.informatik.uni-erlangen.de (Frohwalt Egerer)
Newsgroups: comp.sys.amiga.hardware
Subject: Janus Software Version && BB Problems
Keywords: AT, Amiga, 2286, Janus
Message-ID: <ftegerer.677877023@faui09>
Date: 25 Jun 91 19:10:23 GMT
Organization: CSD., University of Erlangen, Germany
Lines: 42

Could someone tell me if my Janus Software is up-to-date? 

When I reboot the AT it displays the following stuff under the BIOS-box:

Janus-Handler 2.63
Janus Library 33.1

I suspect I got some strange sort of software, as I think the highest Janus
version is 2.0. (Do I have a 1.63 that was patched by some $#@!&* ?) The
software I have leaves 'dead' Intuition-screens, after you quit the
PCColor (PCMono) Program. (Yes - the window closes)

Besides that thing there are many other Problems with the board, it often
doesn`t configure when BindDrivers is executed, sometimes it has a
Parity Error and someetimes it doesn't load the Janus Software from
the Amiga side. (Just behaves like a normal AT without any Disk mounted
to it)

My Hardware configuration:

ALFII HD Controller
Supra RAM Board (6 Meg)
Amiga 2000 Rev 4
ECS
AmigaOS 1.3 and 2.0  (The board works _slightly_ better under 2.0)

Another thing:

Today I got an A2630 Turbo Board with 2 Megs RAM - now I got 8 Megs RAM
plus the BridgeBoard. The result: out of autoconfig space.
Now the question:
Is there any way to make the BridgeBoard autoconfig to some other area?
I got SO MUCH of free address space, and the BB configs to the area
where the mem expansions belong!

	

--

Don't panic!                   \\|||//         Frohwalt Egerer   Am Faerberhof 6
                                |O O|                            8520 Erlangen
----------------------------------U------------------------------09131/204791---