Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!ucbvax!RICHTER.MIT.EDU!krowitz
From: krowitz@RICHTER.MIT.EDU (David Krowitz)
Newsgroups: comp.sys.apollo
Subject: Re:  Exabytes on Series 400's
Message-ID: <9106241456.AA04010@richter.mit.edu>
Date: 24 Jun 91 14:56:46 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 17

I've got an additional Exabyte problem for you ... we've
got one of the older 8200's attached to a DN3500 running
off of the SCSI interface board provided by Workstation solutions.
I tried running the drive off the WD7000 SCSI interface,
but the node would crash nearly every time the drive was
power cycled or whenever we got even the tiniest bit of
static discharge. This is with SR10.2, not SR10.3, by
the way. We also saw these crashes on DN2500's.



 -- David Krowitz

krowitz@richter.mit.edu   (18.83.0.109)
krowitz%richter.mit.edu@eddie.mit.edu
krowitz%richter.mit.edu@mitvma.bitnet
(in order of decreasing preference)