Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!pacbell.com!ucsd!nosc!crash!pnet01!pro-sol.cts.com!mdavis
From: mdavis@pro-sol.cts.com (Morgan Davis)
Newsgroups: comp.sys.apple2
Subject: Re: ModemWorks upgrade
Message-ID: <1991Jun22.103621.6292@crash.cts.com>
Date: 22 Jun 91 10:36:21 GMT
Sender: root@crash.cts.com
Organization: Crash TimeSharing, El Cajon, CA
Lines: 29

In-Reply-To: message from lazer@lablues.UUCP

Again, to change old versions of Apple-Net to work with the newer
ModemWorks (the latest version is 2.1):

1.  Remove all &MODE commands.  They're not needed anymore.
    They only served to set up the carrier mode when &PICKUP
    is used.  In ModemWorks 2.0C and newer, &MODE is replaced
    by &PICKUP's new mode argument (which really isn't needed
    unless you're doing something out of the ordinary, like
    answering a ringing line with an originate carrier).

2.  Any &HOME commands can be changed to HOME by dropping the
    ampersand.

If you don't have ModemWorks 2.1 and would like to upgrade
(which includes a new manual that describes 8 new commands),
send $20 and your original ModemWorks disk to:

Morgan Davis Group
10079 Nuerto Lane
Rancho San Diego, CA
91977-7132      USA

--Morgan

UUCP: crash!pro-sol!mdavis           AOL, BIX: mdavis  
ARPA: crash!pro-sol!mdavis@nosc.mil  GEnie:    m.davis42
INET: mdavis@pro-sol.cts.com         ProLine:  mdavis@pro-sol