Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!ucsd!ogicse!clark!pro-hindugods.cts.com!apollo
From: apollo@pro-hindugods.cts.com (Amrit Chauhan)
Newsgroups: comp.sys.apple2
Subject: BASIC printing
Message-ID: <1991Jun23.150726.22459@clark.edu>
Date: 23 Jun 91 13:25:07 GMT
Sender: usenet@clark.edu
Organization: Proline network.
Lines: 23


        I have an Apple //gs with an ImageWriter II hooked into the printer
serial port.  Everyone knows that BASIC programs have lines that extend
beyond 80 characters.  Well, is there any way I can get the printer to
print them on separate lines?  Whenever you do a "pr#1" and type "list"
every line that extends beyond 80 columns is really screwed.  It prints the
first 80 characters just fine, but after that it never CR and prints the
rest of the line on the same line giving you unreadable text.  It only
linefeeds when it reaches the end of that particular line.  Is there a
special control panel setting or a program that will allow me to do this? 
Thanks in advance.

Amrit

===The Hindu Love Gods BBS - - - - Bloomfield Hills, MI - - - -313/644-0481===
ProLine:  apollo@pro-hindugods                | Amrit S. Chauhan
Internet: apollo@pro-hindugods.cts.com        | Voice: 313/644-2971
UUCP:     crash!pro-hindugods!apollo          | Intel 9600ex Modem in use.
ARPA:     crash!pro-hindugods!apollo@nosc.mil | PPE member: thanks jwolverton
-------------------------------------------------------------------------------
The only ProLine site in the 313 area.  Come on, someone buy a ProLine here.
:)  :-)  C:#  %-|   =|:-)=  :<)=  `-)  :-C  :-O  :-D  B-)  8-:)  :->  :-c  :*)
===============================================================================