Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!ogicse!clark!pro-nka.cts.com!matthew
From: matthew@pro-nka.cts.com (Matthew McGehrin)
Newsgroups: comp.sys.apple2
Subject: Re: BASIC printing
Message-ID: <1991Jun24.025807.25916@clark.edu>
Date: 23 Jun 91 21:24:12 GMT
Sender: usenet@clark.edu
Organization: Nihon Kohden America's Unoffical BBS, Leonia, NJ
Lines: 25

In-Reply-To: message from apollo@pro-hindugods.cts.com


> print them on separate lines?  Whenever you do a "pr#1" and type "list"
> every line that extends beyond 80 columns is really screwed.  It prints
the
> first 80 characters just fine, but after that it never CR and prints the
> rest of the line on the same line giving you unreadable text.  It only
> linefeeds when it reaches the end of that particular line.  Is there a
> special control panel setting or a program that will allow me to do this?
> Thanks in advance.
 
I had this problem on a apple //e and a imagewriter I printer. Make sure
first that you are in 40 column mode, then issue a pr#1 and type "list"
everything should be fine. For some odd reason this does not work in 80 col
mode for me. 
 
-- matthew

+------------------------------------+---------------------------------------+
| Internet: matthew@pro-nka.cts.com  | Pro-Nka : 201-944-3102 : 9600/v32/v42 |
|     uucp: crash!pro-nka!matthew    | Leonia, New Jersey    Intel 9600EX    |
|                                    |                                       |
| All thoughts are mine. If you have | a different idea, email it or post it.|
+------------------------------------+---------------------------------------+