Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!casbah.acns.nwu.edu!nucsrl!tellab5!laidbak!amiganet!mikeb From: mikeb@amiganet.chi.il.us (Mike Biewenga) Newsgroups: comp.sys.handhelds Subject: Re: HP48sx and the Amiga Message-ID: Date: 25 Jun 91 04:53:30 GMT References: Organization: Amiga Network Information Systems Lines: 29 > > Has anyone had any luck using an Amiga to communicate w/their HP48? I >recently got a terminal program that supports Kermit but I've been unable to >establish communications. I've been successful w/the software that came with >the cable on an IBM, and have tried it on an Apple IIe (with mixed results). >I'd prefer to do all this on my Amiga. Anyone had any luck? Any suggestions >for software? Please let me know... > >Paul Mrozowski >NetMail: pm501s913@sycom.UUCP Yes... I have! I'm using vt100 term with kermit at 9600 baud. (I get lots of errors though) All the transfers I've tried have worked (archive and Up/Downloads). What is it that it doesn't do? The term program I am using is very simple and doesn't check for things like DSR or CD. Maybe that is the problem. My point is: I have an Amiga and an HP48 and I can get them to communicate just fine. I made a very simple terminal type program for my HP to check my connections. It just sends and recieves out of the HP port. It might at least let you make sure everything is connected correctly. If you want it let me know and I'll put it up. Give me more details and I'll try to help. Mike mikeb@amiganet.chi.il.us MY only problem is that I cant get a copy of <->ASC so I cant use most of the programs I find here...where do I get this? (I made my own cable)