Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!gatech!psuvax1!eds1!wa3wbu!john
From: john@wa3wbu.UUCP (John Gayman)
Newsgroups: comp.sys.ibm.pc
Subject: DOS 5.0 upgrade ?
Message-ID: <810@wa3wbu.UUCP>
Date: 21 Jun 91 01:37:28 GMT
Organization: @ WA3WBU, Marysville, PA
Lines: 20


   Does anyone know the difference between the DOS 5.0 upgrade kit and 
the entire release ?  It sounds like the upgrade kit has an automated
install routine which senses a prior version and automatically installs.
Does this mean you cannot install the upgrade to a freshly formatted
hard disk ?  Will DOS 5.0 allow you to run completely from floppy for doing
low-level disk type maintenance ?  There also seems to be a lot of
confusion about where exactly DOS 5.0 gets its extra memory, is it from
extended ?  I mean I have a older 8 Mhz 80286 with 640K conventional and
384 extended... will I realize the memory gain ?  I'd sure appreciate a
detailed explaination from someone in the know. Thanks!!


						John


-- 
John Gayman, WA3WBU              |           UUCP: uunet!wa3wbu!john
1869 Valley Rd.                  |             
Marysville, PA 17053             |           Packet: WA3WBU @ WB3EAH