Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!batcomputer!caen!malgudi!sunc!cis.ohio-state.edu!sample.eng.ohio-state.edu!purdue!news.cs.indiana.edu!samsung!cs.utexas.edu!ut-emx!emx.utexas.edu
From: xxx@emx.utexas.edu (V Menayang)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: What is the capacity of Conner CP-30104
Message-ID: <51030@ut-emx.uucp>
Date: 23 Jun 91 04:39:09 GMT
Sender: xxx@ut-emx.uucp
Organization: The University of Texas at Austin; Austin, Texas
Lines: 15

I just bought a Conner hard disk (Hopi series, Model CP-30104).
According to the vendor the hard disk capacity is 120MB.
But DOS chkdsk command only reports "119332864 bytes total 
disk space" which, I believe, comes down to only about 116MB.
The vendor set the disk in the CMOS as Type 47 (User type), 
with Cylinders: 917, Heads: 15 Heads, Sectors: 17, and Size: 114MB.

My questions is: does the vendor set the hard disk to the wrong
specifications?  If yes,  what would be the correct specifications
to enter in the CMOS setup?

I would really appreciate any help on this.

Victor Menayang
victor@ccwf.cc.utexas.edu