Xref: utzoo comp.sys.ibm.pc.hardware:10163 comp.sys.ibm.pc.misc:10763
Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!cunixf.cc.columbia.edu!cunixa.cc.columbia.edu!mig
From: mig@cunixa.cc.columbia.edu (Meir)
Subject: Re: Memory Too FAST?!?!?!
Message-ID: <1991Jun26.005849.954@cunixf.cc.columbia.edu>
Sender: usenet@cunixf.cc.columbia.edu (The Network News)
Nntp-Posting-Host: cunixa.cc.columbia.edu
Reply-To: mig@cunixa.cc.columbia.edu (Meir)
Organization: Columbia University
References: <1991Jun25.155231.8306@ux1.cso.uiuc.edu>
Date: Wed, 26 Jun 1991 00:58:49 GMT

I know nothing about your Dell 2000, but you need to make sure that it will
take 4 meg SIMMS.  Maybe it will only take 1 MEG and lower.  Then, go into
setup and manually enter the amount of memory....

I think that too fast memory is not the problem, here.

* * * * * *  ====================== Meir Green
 * * * * * * ====================== (Internet) mig@cunixb.cc.columbia.edu
* * * * * *  ====================== meir@msb.com  mig@asteroids.cs.columbia.edu
 * * * * * * ====================== (Amateur Radio) N2JPG