Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!caen!spool.mu.edu!uunet!europa.asd.contel.com!gatech!utkcs2!davison
From: davison@cs.utk.edu (Michael Davison)
Newsgroups: comp.sys.ibm.pc.rt
Subject: BSD4.3 reno on RT
Message-ID: <1991Jun25.175047.20660@cs.utk.edu>
Date: 25 Jun 91 17:50:47 GMT
Article-I.D.: cs.1991Jun25.175047.20660
Sender: usenet@cs.utk.edu (USENET News Poster)
Organization: University of Tennessee, Knoxville - CS Department
Lines: 25
Originator: davison@hydra2a.cs.utk.edu

Does anyone have a _working_ version of the reno port for the RT? I have
been abused for several days trying to get this to work - no luck. The 
biggest problem (yes there is more than one) is that the kernel panics
with the following output when compiling a large program.

trap: mcs_pcs=0x42<DATA-ADDR,UNKNOWN>, info=0xe1f88808<PAGE-FAULT>, 
iar=0xe0022380, ics_cs=0xa870010<CHKSTOP-MASK,XLATE,STG-PROT>
CSR=220000ff
R0 ... R3
R4 ... R7   (oh who cares?)
R8 ... Rb
Rc ... Rf
exception stack(1): l r0,e1f889e4
REP1=123f03fe SER=1008<PAGE-FAULT,LOAD> SEAR=ff000000 TRAR=39f800
TCR=107f<TLIPT> HAT/IPT=7f
panic: kernel trap

This must be understandable to someone. Any ideas?

Thanks,
Mike
-- 
Michael Davison            |  davison@cs.utk.edu
Dept. of Comp. Science     |  
University of Tennessee    |  work phone:  +1 615 974 8990