Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!ogicse!milton!burdett
From: burdett@milton.u.washington.edu (Michael Burdett)
Newsgroups: comp.sys.ibm.ps2.hardware
Subject: IBM CD-ROM
Keywords: CD-ROM
Message-ID: <1991Jun21.200555.17534@milton.u.washington.edu>
Date: 21 Jun 91 20:05:55 GMT
Organization: University of Washington
Lines: 19


Help!  I am trying to install a CD-ROM into a PS/2-80 with a SCSI port and
the computer will lockup as soon as it reads the device driver in config.sys.
One posible problem maybe the "80" came with a SCSI port, the IBM CD-ROM came
with another Micro Channel SCSI card as well. I thought the SCSI existing
in the PS/2-80 would be the same as the IBM SCSI card ordered with the 
CD-ROM.  So I used the existing SCSI port.  Is this wrong?  Are ther yet
differnt SCSI standards with in the same vendor? I could use any help I
can get. 

Thanks,

Mike Burdett
burdett@u.washington.edu
-- 
Mike Burdett                   "These are my opinions and don't reflect
Micro Manager                   the policies of the U.W. or Psychology."
University or Washington
Department of Psychology