Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!olivea!uunet!munnari.oz.au!uniwa!DIALix!metapro!bernie From: bernie@metapro.DIALix.oz.au (Bernd Felsche) Newsgroups: comp.terminals Subject: Re: help: kimtron kt-7 Message-ID: <1991Jun21.030110.6264@metapro.DIALix.oz.au> Date: 21 Jun 91 03:01:10 GMT References: <1991Jun19.215840.17386@beaver.cs.washington.edu> Organization: MetaPro Systems, Perth, Western Australia Lines: 24 In <1991Jun19.215840.17386@beaver.cs.washington.edu> cypark@cs.washington.edu writes: >Is there anyone who is using or has used kimtron kt-7 terminal? >My terminal, which I bought at the Univ. surplus auction 4 years ago, >is not working well. It displays all of my typings twice. >I guess that it echos typed characters even in online mode. >Without any manual about the terminal, >I can't find the sequence to set-up and reset it. >Any other information (e.g. kimtron service phone number) would be very welcomed. Press SHIFT-SETUP, which should display the setups on line 25. Then use the cursor keys to go left-right and up-down to go through the option values. (Or is it space-bar? I haven't used my kt-7 in a while) You probably want to set full-duplex. Anybody who can get hold of a service manual: please let me know. I have an Owner's manual, which is of little use is stopping the EHT hiss that's appeared. -- Bernd Felsche, _--_|\ #include Metapro Systems, / sold \ Fax: +61 9 472 3337 328 Albany Highway, \_.--._/ Phone: +61 9 362 9355 Victoria Park, Western Australia v Email: bernie@metapro.DIALix.oz.au