Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!ysub!psuvm!barilvm!bimacs!shimon
From: shimon@bimacs.BITNET (shimon yitzhak)
Newsgroups: comp.unix.admin
Subject: Formula that represents the load on work-station
Message-ID: <3412@bimacs.BITNET>
Date: 23 Jun 91 15:58:26 GMT
Reply-To: shimon@bimacs.UUCP (shimon yitzhak)
Organization: Bar-Ilan University, Israel.
Lines: 29


  I'm developing a program that works in parallel on HP-345 (Re. 6.5)
work-stations.

  The program uses file servers of the following types:

        HP-375 (Re. 6.5).
        HP-360 (Re. 6.5).
        SUN 3/60 (Re. 4.1.1.).
  Both the work-stations and the file servers have SCASI disks.

  I'm interested in improving the performance of the software I
developed, by dividing the work between the work-stations according to
the load on each work-station.

  I'm familiar with the parameters fetched from the UNIX rstat and
rnusers commands, but, I'm interested in a formula that will sum-up
the most importand parameters and will end up with one number (scalar)
that will represent the totel load on a work-station.


NOTE: Using the rstat command on a work-station that has a SCASI disk,
doesn't return the  transfer disk parameters.
--
Shimon Yitschak
Bar Ilan University, Israel.
Internet: shimon@bimacs.cs.biu.ac.il
Binet: shimon@bimacs