Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!uunet!mcsun!ukc!stl!robobar!ronald From: ronald@robobar.co.uk (Ronald S H Khoo) Newsgroups: comp.unix.xenix.sco Subject: Re: Running 286 Xenix on a 386 Message-ID: <1991Jun23.163237.10908@robobar.co.uk> Date: 23 Jun 91 16:32:37 GMT References: <1991Jun23.063114.26890@cynic.wimsey.bc.ca> Organization: Robobar Ltd., Perivale, Middx., ENGLAND. Lines: 16 curt@cynic.wimsey.bc.ca (Curt Sampson) writes: > Has anybody else out there run a 286 Xenix on a 386? Are there any > differences between the 286 and the 386 (and their associated support > circuitry) that should cause problems? Dare I try this? ibmpcug.co.uk ran SCO Xenix 286 2.2.1 on a Comapq Deskpro 386/16 for quite a long time. I ran news on it (SCO's binaries, including their port of compress, which you can still get binaries of from SCO) so no hassles. There should be no problems running 286 Xenix on a 386. I certainly had no problems at all. But the 386 software is so much better, I upgraded as soon as I could :-) -- Ronald Khoo +44 81 991 1142 (O) +44 71 229 7741 (H)