Xref: utzoo comp.protocols.tcp-ip.ibmpc:6268 comp.dcom.lans:8479 Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!munnari.oz.au!bunyip.cc.uq.oz.au!brolga!exnirad From: exnirad@brolga.cc.uq.oz.au (Nirad Sharma) Newsgroups: comp.protocols.tcp-ip.ibmpc,comp.dcom.lans Subject: PCroute initialisation problems Message-ID: <1991Jun27.065325.23720@brolga.cc.uq.oz.au> Date: 27 Jun 91 06:53:25 GMT Organization: Prentice Computer Centre, The University of Queensland, Australia. Lines: 42 I am having trouble getting my PCrouter to start up (let alone work!). There must be something simple that I have missed but I haven't been able to pu my finger on it. I've set up a 386sx with 2 x WD8013EPs with one card set for IO address 280H and the other for 2A0H. Shared memory addresses are set for 0D0000H and 0CC000H, respectively. When I started up the router I was told that the packet driver configuration failed. What's strange is that I'm not using any packet drivers! My first suspicion was that I had copied a slip- or pkt-based pcroute to PCROUTE.EXE but after checking several times (and several times more) I have verified that I have been copying the correct WD13WD13.EXE to PCROUTE.EXE. I know how reliable a product PCRoute is so what have I stuffed up ? Incidentally, the boards and machine pass all the normal diagnostics checks that come with them. The version of PCroute is 2.2. (Is this the most recent?) ******* PCroute starting ******* Interface 1 (ethernet) Address 130.102.128.51 NetMask 255.255.0.0 Flags 0000H Metric 0001H The Ethenet Address 0000H The Ethenet Address C0C4H The Ethenet Address 0A2BH Interface 2 (ethernet) Address 130.102.130.9 NetMask 255.255.0.0 Flags 0000H Metric 0001H The Ethenet Address 0000H The Ethenet Address C0FBH The Ethenet Address 0A2BH ERROR Packet Driver config failed (driver not installed?) -- Nirad Sharma (exnirad@brolga.cc.uq.oz.au) Phone : (+61 7) 365 7575 Systems Programmer Fax : (+61 7) 870 5080 Continuing Education Unit The University of Queensland. QLD 4072