Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!think.com!spool.mu.edu!agate!ucbvax!cleveland.Freenet.Edu!aa609
From: aa609@cleveland.Freenet.Edu (Zbig Tyrlik)
Newsgroups: comp.dcom.modems
Subject: T1600 with Interactive 2.2
Message-ID: <9106270117.AA27484@cwns6.INS.CWRU.Edu>
Date: 27 Jun 91 01:17:49 GMT
Article-I.D.: cwns6.9106270117.AA27484
Sender: usenet@ucbvax.BERKELEY.EDU
Reply-To: aa609@cleveland.Freenet.Edu
Organization: The Internet
Lines: 37



Hello netters,
could someone point me where can I get (or who is willing to send me)
the following hints:

1) gettydefs for Telebit T1600 modem;
	I am loking for fixing DTE rate at 19.2/38.4 k

2) Dialers for T1600;

3) line for inittab for T1600 hooked to com1 for dialin and out;

4) settings for T1600 to work with isc 2.2 at fixed speed....

so far I can get it working with default configuration for BSD-UUCP (AT&F4),
and using TB8_19200 in inittab; 
also how to set it to use hardware handshaking? 

5) Where can I get serial card for 2-4 serial ports with 16550? I have 
card with 2 ports, but only second have socketed UART - the first one is 
soldered...

(Sorry if above is very simple - I am slowly learning about UN*X).

PS: I checked Telebit BBS - everything there is about TELEBIT modems - 
I assume Trailblazers, but what we with T1600 have to do? Maybe someone 
in TELEBIT support will glue together a kind of FAQ or update files about
using TELEBIT modems with UN*X, especially if docs for T1600 are offering
one preconfigured setup for HDB UUCP (Interactive 2.2 - BNU), and Tech rep
recommended me using settings for BSD-UUCP.....

Respond to:
aa609@cleveland.freenet.edu   or:            zbig@ncoast.org
also: 						  ncoast!zbig 

Zbigniew Tyrlik