Path: utzoo!telecom-request
Date: Sat, 29 Jun 1991 19:43:27 GMT
From: Vance Shipley <vances@xenitec.on.ca>
Newsgroups: comp.dcom.telecom
Subject: Re: Problems with Meridian 1 and 2400 Baud Modems
Message-ID: <telecom11.504.11@eecs.nwu.edu>
Organization: SwitchView
Sender: Telecom@eecs.nwu.edu
Approved: Telecom@eecs.nwu.edu
X-Submissions-To: telecom@eecs.nwu.edu
X-Administrivia-To: telecom-request@eecs.nwu.edu
X-Telecom-Digest: Volume 11, Issue 504, Message 11 of 12
Lines: 18

In article <telecom11.493.3@eecs.nwu.edu> Paul Lutt <pwl@tc.fluke.com>
writes:

> The main problem is that 2400 baud is almost unusable.  Lots of
> suprious characters and noise.  Our users have pretty much given up on
> 2400 baud and have either retreated back to 1200 baud or gotten
> Telebit modems to use with our in-bound Telebit lines.

This should work perfectly, the Meridian is a "CO quality" switch.

You may be having frame slip problems somewhere.  Can you call
reliably from one extension to the other?  Are you using digital
trunks to the CO?


Vance Shipley     vances@xenitec  vances@ltg  ..uunet!watmath!xenitec!vances