Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!crackers!cpoint!frog!rmkhome!rmk
From: rmk@rmkhome.UUCP (Rick Kelly)
Newsgroups: comp.os.coherent
Subject: Re: What to use for dialing out?/rn
Message-ID: <9106251555.22@rmkhome.UUCP>
Date: 26 Jun 91 00:55:00 GMT
References: <1991Jun23.020348.20525@skypod.guild.org> <1991Jun24.132617.8220@Sandelman.OCUnix.on.ca>
Reply-To: rmk@rmkhome.UUCP (Rick Kelly)
Organization: The Man With Ten Cats
Lines: 18

In article <1991Jun24.132617.8220@Sandelman.OCUnix.on.ca> ken@Sandelman.OCUnix.on.ca (Ken Walker) writes:
>Greetings,
>I've just purchased and installed version 3.0 from a friend.  Does the
>newer versions have cu?  If not, what can I use to dial out?  I hate to
>shut down Coherent, boot up Dos and use Telix all the time.  There must
>be a Terminal emulator out there?
>Thanks,

Use kermit.

Example comaand line:

	kermit cbl 2400 /dev/com1l

This will connect you to the modem on /dev/com1l at 2400 and allow you
to use AT commands to dial out.

Rick Kelly	rmk@rmkhome.UUCP	frog!rmkhome!rmk	rmk@frog.UUCP