Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!think.com!zaphod.mps.ohio-state.edu!cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac!unixhub!slacvm!horst
From: HORST@SLACVM.SLAC.STANFORD.EDU (HORST)
Newsgroups: comp.os.os2.misc
Subject: os2 installation blues
Message-ID: <91179.160056HORST@SLACVM.SLAC.STANFORD.EDU>
Date: 29 Jun 91 00:00:56 GMT
Organization: Stanford Linear Accelerator Center
Lines: 7

I am trying to install IBM OS/2 ver. 1.3 on a PC clone. It fails miserably with
a message: The system detected an internal processing error at location # ...
Trap 000C followed by a bunch of register information. I am using an EISA
MYLEX 486 (33Mhz) system board, an EGA board and a DCE376 caching SCSI disk
controller also from MYLEX.I am able to boot from the OS2 install diskette when
I replace the DCE376 with a Western Digital disk controller to drive the floppy
Any suggestions would be greatly appreciated.