Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!romp!auschs!awdprime!dls From: dls@achilleus.austin.ibm.com (David Skeen) Newsgroups: comp.protocols.iso Subject: Re: QLLC Message-ID: Date: 27 Jun 91 20:47:13 GMT References: <15733@ccncsu.ColoState.EDU> Sender: news@awdprime.UUCP Reply-To: David Skeen Organization: IBM Austin (PSP) Lines: 13 In-reply-to: shafer@handel.CS.ColoState.Edu's message of 26 Jun 91 22:36:33 GMT In article <15733@ccncsu.ColoState.EDU> shafer@handel.CS.ColoState.Edu (spencer shafer) writes: By implementing QLLC on my IBM beastie, can I run both SNA and OSI protocols over the same X.25 link? Have been told that this would eliminate the need for a separate connection for each. True? If your beastie is a 9370, you can define one LINE under the X.25 PORT (in the PACKET major node) with USER=VCNS. That LINE is used for multiple OSI/CS virtual circuits. This holds for VM/VTAM V3R3 and the corresponding VSE release. -- Dave Skeen IBM Internal: dls@achilleus.austin.ibm.com D61/803 Zip 2603 IBM VNET: SKEEN at AUSTIN Austin, TX 78758 Internet: dls@dce.austin.ibm.com