Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!dimacs.rutgers.edu!rutgers!modus!otello!gear!wolf!p1004.f600.n332.z2.fidonet.org!Paolo.Canali
From: Paolo.Canali@p1004.f600.n332.z2.fidonet.org (Paolo Canali)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: NEW logitech mouseman & C9 serial mouse on ami!!
Message-ID: <15086.286C3F32@wolf.sublink.org>
Date: 28 Jun 91 19:19:30 GMT
Sender: ufgate@wolf.sublink.org (newsout1.26)
Organization: FidoNet node 2:332/600.1004 - West Coast Hub, Pisa Italy
Lines: 26


 MW> The adaptor pinout I posted a while ago was for a BUS mouse, not
 MW> serial, sorry. I believe there is a program on one of the last 30-40
 MW> fish which enables a serial mouse to be used through the serial port
 MW> of the computer.

The driver work only with serial mouses working under "mouse system" standard.
I am currently using this driver with a Agiler AGM-200 mouse (nice
mouse, with 3 microswitch buttons).
The only problems are:
-The mousepointer "jump" when i move the mouse fast (the same effect we can
 see on PC-clone computers).
-the driver does not support the "select & cut" operation under kickstart 2.0
 ( CON: windows)

 -+-+-+-+-+-+-+-+-+-+-+-+-+-+
 +Paolo Canali              -
 -Fidonet: 2:332/600.1004   +
 +                          -
 --+-+-+-+-+-+-+-+-+-+-+-+-+-

--  
 WolfNet BBS Pisa (Italy) Tel. +39-50-589050 300-14.4K Baud Matrix 2:332/602.0
 Paolo Canali - via FidoNet node 2:33/800
 UUCP: ...!gear!wolf!332!600.1004!Paolo.Canali
 ARPA: Paolo.Canali@p1004.f600.n332.z2.fidonet.org