Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!comp.vuw.ac.nz!actrix!David.Empson From: David.Empson@actrix.gen.nz (David Empson) Newsgroups: comp.sys.apple2 Subject: Re: Appletalk and a ROM 1 GS Message-ID: <1991Jun29.150100.11791@actrix.gen.nz> Date: 29 Jun 91 15:01:00 GMT References: <910628092129.20c02102@CCSVAX.SFASU.EDU> Organization: Actrix Information Exchange, Wellington, New Zealand Lines: 39 Comment-To: A_MILLSBS@CCSVAX.SFASU.EDU In article <910628092129.20c02102@CCSVAX.SFASU.EDU> A_MILLSBS@CCSVAX.SFASU.EDU (B. Scott Mills) writes: > The math dept here has about a dozen rom 1 WOZ edition GS machines. Many have > 1 meg a few only have 512k. They sent a machine over here to my office to work > with but i dont have the manuals. > > HOW CAN I GET THE THING TO APPLETALK? > > I dloaded the latest system off ftp.apple.com (some of them are still using > 4.0) and made me a new tools and system disk (I used my //c to do this) and it > will start up just fine. I tried to use the installer to make me a new system > disk and intall appleshare and it seems to be ok. When I rebooted iot said I > must enable Appletalk on the control panel. HOW? When I installed > appleshare on a 3.5 disk i didnt have all the control panels, and when I hit > control-OA-esc to get to the control panel i see no way to turn on Appletalk. > On the ROM 01 IIgs, use either control panel's "Slots" option. You will need to set Slot 1 or Slot 2 to "Your Card", depending on where you have AppleTalk connected to the IIgs. You must also set slot 7 to "AppleTalk" (as opposed to "Your Card"). The IIgs must have at least 768k to run on AppleTalk (preferably more), so you might have problems with those 512k machines. > Oh yeah, When I turn on this system I was VERY suprised that it had a > transwarp in it. That may also cause problems. The ZIPGS provides a facility to slow down the computer slightly to allow AppleTalk to work properly (probably causes timing problems if the computer is running too fast). There may be a similar option for the TransWarp. If nothing else works, try disabling it completely. David Empson David.Empson@bbs.actrix.gen.nz -- David.Empson@bbs.actrix.gen.nz