Newsgroups: comp.sys.cbm
Path: utzoo!utgpu!watserv1!watdragon!dragon!himacdon
From: himacdonald@watmsg.uwaterloo.ca (Hamish Macdonald)
Subject: Re: RESET button for C64 (Oops!!)
In-Reply-To: house_s@cho006.cho.ge.com's message of 16 Jun 91 03: 45:01 GMT
Message-ID: <1991Jun27.172700.4229@watdragon.waterloo.edu>
Sender: news@watdragon.waterloo.edu (News Owner)
Reply-To: himacdonald@watmsg.uwaterloo.ca
Organization: University of Waterloo, Waterloo, Ontario
References: <1991Jun13.125540.2364@cho006.cho.ge.com>
	<1991Jun14.130910.2377@cho006.cho.ge.com>
	<1991Jun15.234501.2380@cho006.cho.ge.com>
Date: Thu, 27 Jun 1991 17:27:00 GMT
Lines: 7


> In summary,  _____
> just connect RESET to ground via a normally-open switch.  One of the easiest
> ways of doing this is to connect Pin 1 to Pin 3 of the cartridge port 
> (expansion port, I think) 

Perhaps a 1K resistor to limit current should be stuck in there too.