Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!spool.mu.edu!think.com!yale.edu!cmcl2!uupsi!dorsaidm!skipm
From: skipm@dorsai.com (Dorsai SysOp)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Re: need jumper settings on TEAC floppy drive (360K)
Message-ID: <6y8643w163w@dorsai.com>
Date: 26 Jun 91 22:50:40 GMT
References: <1991Jun26.015138.12557@bronze.ucs.indiana.edu>
Organization: The Dorsai Diplomatic Mission ( Mail address : user@dorsai.com )
Lines: 24

ntaib@silver.ucs.indiana.edu (Nur Iskandar Taib) writes:

> I got my hands on a pair of used TEAC 360K 5 1/4" floppy
> drives, and I can't get them to work in an original IBM
> PC (5 slots).
> 
> The machine boots OK (I've left the original IBM drive in 
> as drive A), but any kind of attempted access on drive B
> (eg: DIR B:) results in a ERROR READING DRIVE B SECTOR NOT
> FOUND message. The machine works fine with a Mitsubishi 
> drive pulled from a Leading Edge (don't own the drive though
> *sigh*) so the controller is OK
 
Try placing the FDD Controller in the first slot...
 
Skip

**************************************************************************
** SkipM@DORSAI.com   -  The Dorsai Embassy / Dorsai Diplomatic Mission **
** (Systems Manager)  -  Consulate : (212) 431-1944                     **
**************************************************************************
** "The difference between a good man, and a bad man, is the choice of  **
**  cause." - Unknown                                                   **
**************************************************************************