Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!spool.mu.edu!sol.ctr.columbia.edu!ira.uka.de!fauern!faui43.informatik.uni-erlangen.de!mnrausch From: mnrausch@immd4.informatik.uni-erlangen.de (Martin Rausche) Newsgroups: comp.sys.ibm.pc.hardware Subject: Re: Soundblaster Keywords: Soundblaster, DMA #1 Message-ID: <1991Jun27.060425.6428@informatik.uni-erlangen.de> Date: 27 Jun 91 06:04:25 GMT References: <1991Jun26.202551.3025@sactoh0.sac.ca.us> Organization: CSD., University of Erlangen, Germany Lines: 32 sap@sactoh0.sac.ca.us (Stephan A. Puga) writes: >My SB won't work in the cmoputer I have! (Has anyone heard of HD >Computers?) I keep getting error 0400 when running the TEST-SBC program. >I know I have AMI BIOS (I'm running a 33MHz '386). I have run the Checkit >program and none of the cards installed use DMA channel #1 so I don't >understand how a conflict could occur (unless it is a bad motherboard >design). Should I sell this thing and try for a Soundmaster? > >Any help would be appreciated! I know about this problem with C&T motherboards. In my case only a change of the motherboard fixed this problem. (My local dealer fixed this problem for free !!!!!!!!!). I use a SIS motherboard now. Maybe you've a similar problem, but I don`t know whether switching to Soundmaster can fix that problem or not. Martin. > > Stephan A. Puga >-- >############################################################# ># When I discover this file, # sactoh0.SAC.CA.US # ># I will change it! # UUCP=..ames!pacbell!sactoh0 # >################## default .signature file #############***** --- ------------------------------------------------------------------------------ | Martin Rausche | | EMail: mnrausch@immd4.informatik.uni-erlangen.de | | Trust me, I know what I'm doing -- Sledge Hammer | ------------------------------------------------------------------------------