Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!uunet!mcsun!ukc!warwick!nott-cs!lut.ac.uk!eljaj
From: J.A.Jones@lut.ac.uk (Jeff Jones)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Help required with Rampage memory board
Message-ID: <1991Jun27.153041.1032@lut.ac.uk>
Date: 27 Jun 91 15:30:41 GMT
Reply-To: J.A.Jones@lut.ac.uk (Jeff Jones)
Organization: Loughborough University, UK.
Lines: 26

Hi,


Does anybody have any information regarding the switch settings for an
AST rampage 286 board populated to 1 meg ? . I purchased this for very
little cash, however it came without documentation. I wish to use this
in a AT class machine with a possible 1 meg on board (640k inserted at
present). I want to use it as XMS or EMS. I believe this is possible
with this board. I intend to put another meg on the rampage at a later
date if it works.

	Thanks in advance
			
			Jeff

ps this is a repost. I don't think the first one got out.

==============================================================================
= Jeff Jones    = IERI = International Electronics Reliability Institute     =
=                      = Dept of Electrical and Electronic Engineering       =
=                      = Loughborough University of Technology               =
=                      = Loughborough, Leics. LE11 3TU, UK                   =
=                      = Telephone - +44-509-263171 ext 4196                 =
=                      = Fax - +44-509-222854                                =
=                      = Email - J.A.Jones@uk.ac.lut                         =
==============================================================================