Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!uunet!nowhere!caf
From: caf@omen.COM (Chuck Forsberg WA7KGX)
Newsgroups: comp.sys.ibm.pc.misc
Subject: Re: FULL VT100 emulation software -- Where?
Message-ID: <1991Jun26.165737.25158@omen.COM>
Date: 26 Jun 91 16:57:37 GMT
References: <1991Jun20.113757.20666@deadzone.uucp> <1991Jun20.230118.3665@kessner.denver.co.us> <9149@drutx.ATT.COM>
Organization: Omen Technology INC
Lines: 23

In article <9149@drutx.ATT.COM> rlp@druwa.ATT.COM (PrehnRL) writes:
-> >Hi.  I am looking for a package that fully supports VT100 emulation.  All of thecommunications software I have seen for the PC doesn't fully support it, which  becomes readily apparant when I use program that depend on a full VT100
-> >emulation, like most editors.
-
-I Haven't tried TELIX 3.15, 3.12 I have tried.  I have also tried QMODEM
-GT Powercomm, BOYAN5.0, Procomm, Procomm+TD, Telemate 2.11.  None of which
-work with 80 column curses based forms programs that run well on VT100's.

Give ZCOMM a try.  It passes every screen test on "vttest" except for
double sized characters which require video capabilities not available
without going to high res graphics.  If your display supports 132
columns ZCOMM can use that too.

Chuck Forsberg WA7KGX          ...!tektronix!reed!omen!caf 
Author of YMODEM, ZMODEM, Professional-YAM, ZCOMM, and DSZ
  Omen Technology Inc    "The High Reliability Software"
17505-V NW Sauvie IS RD   Portland OR 97231   503-621-3406
TeleGodzilla:621-3746 FAX:621-3735 CIS:70007,2304 Genie:CAF
-- 
Chuck Forsberg WA7KGX          ...!tektronix!reed!omen!caf 
Author of YMODEM, ZMODEM, Professional-YAM, ZCOMM, and DSZ
  Omen Technology Inc    "The High Reliability Software"
17505-V NW Sauvie IS RD   Portland OR 97231   503-621-3406