Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!elroy.jpl.nasa.gov!decwrl!parc!alcocer From: alcocer@parc.xerox.com (Dario Alcocer) Newsgroups: comp.sys.novell Subject: Re: 3.11 install-General Protection Processor Exception! Message-ID: Date: 27 Jun 91 00:05:56 GMT References: <22450@brahms.udel.edu> Sender: news@parc.xerox.com Organization: Xerox PARC Lines: 66 sylvia@brahms.udel.edu (Sylvia M Berta) writes: >Here we go again!...what did I do wrong this time?! Two new 3.11 >installations...easy! piece of cake! Wrong! Actually, the installation >went fine. Got the LAN drivers from the manufacturer's BBS, loaded >okay, although got a message saying that there were old API calls, and >that the drivers should be upgraded ASAP...everything else seemed to go >fine. Created new workstation shells, and IPX'd...no >problem...NET4...no problem...attached to each server in turn, BUT... >execute LOGIN.EXE and the server ABENDS!!! >ABEND: General Protection Processor Exception (Error Code 00000000) > OS Version Novell NetWare 3.11 (250 user) 2/20/91 > Running Process: Server 01 Process >STACK: > CB E9 04 00 9E 6D 10 00 76 23 06 00 A3 68 10 00 > 76 23 06 00 80 3C 18 00 2C 23 06 00 00 00 00 00 > 40 1C 19 00 00 68 10 00 E0 83 00 00 01 00 00 00 >And of course I had the option of dumping to diskettes, but I didn't >have 12 formatted diskettes hanging around at the time. Here's the >hardware configuration: I'm not much sure how much use it will be to you, but you my try typing '386debug' after the ABEND dump to get to the debugger; at this point you can type '.h' to get a list of commands. In this list there is (as far as I can remember) a command to print out which NLM caused the ABEND. Hopefully this way you find out if the outdated .LAN drivers might have caused the problem. > IBM PS/2 Model 80 (16 MHz, so I'm told...yup, they're oldies) > 310 Mb ESDI hard drive in first machine > (2) 70 Mb ESDI hard drives in second machine > 12 Mb RAM in each machine > Cabletron 3010x NIC in each machine > DayStar Digital LT200MC card for Localtalk in first machine >I am willing to accept that I left out something somewhere, even in both >installs, but darned if I can figure out what! Any help would be dearly >appreciated! 8-) >The error message manual doesn't have me do anything more than copy the >dump to disk and call an NSO. ARRRGHGHGH!!! It's never simple!! Another option is to get on Compuserver and 'go nova' to see if you can get new drivers for the ESDI disks, and possibly other NLM's for IBM PS/2's; I remember there being quite a few patches to several of the stock NLMs for PS/2 Micro Channel support. Maybe something about your configuration has been documented as troublesome on NETWIRE. Hope this helps... +--------+\ Dario Alcocer | + \ Software Engineer, Xerox Corporation | +__\ 3333 Coyote Hill Road, Palo Alto, CA 94304 (USA) | | (415) 494-4851 | | ======================================================== | | Internet: alcocer@parc.xerox.com, alcocer.PARC@xerox.com | X E R O X | Standard disclaimers apply. +-----------+ -- +--------+\ Dario Alcocer | + \ Software Engineer, Xerox Corporation | +__\ 3333 Coyote Hill Road, Palo Alto, CA 94304 (USA)