Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!spool.mu.edu!uunet!math.fu-berlin.de!tmpmbx!netmbx!weis
From: weis@netmbx.UUCP (Dietmar Weis)
Newsgroups: comp.unix.ultrix
Subject: Re: printcap "fs"/"xs" entry for ln03r 8/1/none ?
Message-ID: <2442@netmbx.UUCP>
Date: 29 Jun 91 18:56:43 GMT
References: <1991Jun26.205341.22962@sarah.albany.edu>
Organization: netmbx, Berlin, Germany
Lines: 21

rds95@leah.albany.edu (Robert Seals) writes:

>Hello,
>We have an LN03R connected to a microvax 2 via dhv11.
>The serial line just has pins 2, 3, and 7. Is there
>some common wisdom on this problem? Can anyone provide
>the 'proper' combination of fs/xs entries and LN03R
>switch setting to make it work right?

Use "lprsetup" as it has built in the correct entries for DEC printers.
Every entry has even an informational help text via the "?" key.
Good entries are fs#023 or fs#03 and xs#044000.

>thank you very much,
>rob

Dietmar
-- 
weis@netmbx.UUCP         | Dietmar Weis         DONOP CONSULT GmbH
Voice: 030/884 28 54-0   |                      Uhlandstrasse 179/180
Fax:   030/882 55 29     |                      D - 1000 Berlin 12