Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!uunet!cs.utexas.edu!chinacat!chip From: chip@chinacat.unicom.com (Chip Rosenthal) Newsgroups: comp.unix.xenix.sco Subject: Re: ctsflow solution for xenix cu/uucico and fas question Message-ID: <1991Jun29.014557.428@chinacat.unicom.com> Date: 29 Jun 91 01:45:57 GMT References: <1991Jun25.174033.7701@d.cs.okstate.edu> Organization: Unicom Systems Development, Inc. Lines: 14 In article gemini@geminix.in-berlin.de (Uwe Doering) writes: >The problem with sio is that it tries to be smart in that it looks at >several I/O addresses whether it can find a UART at that location That's all controlled by sioconf.c. For example, I've had to comment stuff out of it to keep the system from thinking it stumbled upon a Quadram serial card when in fact it was an Ethernet card. If you comment out COM2 then sioinit() will never find it. -- Chip Rosenthal 512-482-8260 | Closed user interfaces for open systems? Unicom Systems Development | No, thank you. | Boycott Lotus Development Corp.